Atlona AT-HDVS-200-RX HDBaseT Scaler with HDMI and Analog Audio Outputs

Atlona AT-HDVS-200-RX HDBaseT Scaler with HDMI and Analog Audio Outputs

Atlona AT-HDVS-200-TX-WP (Transmitter Wall Plate)

Atlona AT-HDVS-200-TX-WP (Transmitter Wall Plate)

Atlona AT-HDVS-150-TX-WP - video/audio extender - HDMI, VGA

$449.97
SKU
3673

Two-Input Wallplate Switcher for HDMI and VGA with HDBaseT Output

AT-HDVS-150-TX-WP
  • US two-gang enclosure for wallplate openings
  • 2×1 HDBaseTM switcher with HDMI® and VGA inputs
  • Designed for point-to-point extension to the AT-HDVS-150-RX scaling receiver
  • HDBaseT transmitter for AV, power, and control up to 230 feet (70 meters)
  • Remotely powered via PoE (Power over Ethernet)
  • Automatic display control (when connected to the AT-HDVS-150-RX)
  • Automatic input selection
  • Front panel input selection and display on/off control – optional AT-HDVS-TX-WP-NB faceplate available without control buttons

FEATURES

US two-gang enclosure for wallplate openings

  • Shallow, 1.5 inch (40 mm) deep enclosure and recessed RJ-45 connector simplify integration
  • Attractive alternative to tabletop boxes for placement near presenter’s station
  • UK version also available – AT-HDVS-150-TX-WP-UK

2×1 HDBaseT switcher

  • Features an HDMI input plus a VGA input with audio*
  • Allows advanced HDMI display devices to be used with legacy VGA sources
  • * Audio signals will not pass without an accompanying video signal

Designed for point-to-point extension to the AT-HDVS-150-RX HD scaling receiver

  • Extends AV up to 230 feet (70 meters) @ 1080p or 1920×1200
  • Provides a cost-effective yet compact, automated AV system with the convenience of automatic input selection and display control

Long distance HDMI extension

  • Transmits AV up to 230 feet (70 meters) @ 1080p or 130 feet (40 meters) @ 4K/UHD* using CAT6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation
  • * Allows 4K/UHD transmission when used with a compatible HDBaseT receiver

Remotely powered via PoE (Power over Ethernet)

  • IEEE 802.3af PoE Powered Device (PD)
  • Power for transmitter is supplied by AT-HDVS-150-RX over HDBaseT

Automatic input selection using hot plug detection

  • Selects active input when sources are connected or if there is a change in source power status
  • Enables simplified, automatic system operation with no user intervention necessary

Automatic display control (when connected to the HDVS-150-RX)

  • Automatically changes display power state based on active or standby mode of the switcher (in conjunction with the HDVS-150-RX). Control signals to display are transmitted via RS-232.
  • Eliminates the need for a complex control system

Front panel input selection and on/off controls

  • Overrides auto-switching when more than one active source is present
  • Simple manual operation allows presenter to maintain control of AV system
  • Optional AT-HDVS-TX-WP-NB faceplate available without control buttons

Field-updatable firmware

  • USB port provides an easy means for device updates
  • Ensures long-term system return on investment

Front panel power and input selection status LEDs

  • LED indicators provide power and input selection status information
  • Provides easy setup and troubleshooting

Included accessories

  • User guide and white faceplate
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

No Related Posts