Crown Audio DSi-4000 1200W 2-Channel Solid-State Power Amplifier

Crown Audio DSi-4000 1200W 2-Channel Solid-State Power Amplifier

QSC MP-A80V MPA SERIES 1600W FLEXAMP MULTI-CHANNEL HI-Z/LO-Z AMPLIFIER

QSC MP-A80V MPA SERIES 1600W FLEXAMP MULTI-CHANNEL HI-Z/LO-Z AMPLIFIER

Crown Audio XLi 2500 1600W Stereo Power Amplifier

$565.00
SKU
302463

Powerful. Reliable. Affordable.

The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Power Matrix

Recommended for: Portable PA.

Features
 
  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity - 0.775V and 1.4V
  • Efficient forced-air cooling prevents excessive thermal buildup
  • Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs
  • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
  • Protection against shorts, no-load, on/off thumps and radio-frequency interference

Specifications

 
Frequency Response 20 Hz - 20 kHz, +0/-1 dB (at 1 watt)
THD <0.5%, 20 Hz - 20 kHz
Intermodulation Distortion =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)
Slew Rate >10V/us
Voltage Gain 33 dB
Damping Factor (8 ohms, 10 Hz to 400 Hz) >200
Signal To Noise Ratio (A-weighted) >100 dB
Crosstalk (below rated power) 20 Hz to 1 kHz -75 dB, -59 dB
Input Sensitivity (for full rated power at 8 ohms) 0.775V or 1.4V
Input Impedance (nominal balanced, unbalanced) 20kO, 10kO
AC Line Voltage and Frequency Configurations Available (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz
Dimensions 19" x 3.5" x 12.4" (48.3cm x 8.9cm x 31.5cm)
Weight 29.7lbs (13.5kg)
IEC Power Connector 15A
  •  
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account