Atlona AT-HDVS-200-TX-WP (Transmitter Wall Plate)

• 3×1 HDBaseT^TM switcher with two HDMI^® inputs and one VGA input
• HDBaseT transmitter for AV, Ethernet, power, and control up to 330 feet (100 meters)
• 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling (with the AT-HDVS-SC-RX or Omega Series receivers)
• Remotely powered via PoE (Power over Ethernet)
• Automatic input selection and automatic display control
• Front panel input selection, display on/off, and volume control
• TCP/IP and RS-232 control

3×1 HDBaseT switcher

• Features two HDMI inputs plus a VGA input with audio
• Allows advanced HDMI display devices to be used with legacy VGA sources
• Audio input can be assigned to any of the video inputs
• Audio-only playback available without video signal present

Remotely powered via PoE (Power over Ethernet)

• IEEE 802.3af PoE Powered Device (PD)
• Power for transmitter is supplied by the AT-OME-RX21, AT-HDVS-200-RX, or other Atlona device over HDBaseT
• Saves time and integration costs
• AT-HDVS-200-TX-PSK available for applications where the transmitter with an external power supply is needed for use with an HDBaseT-equipped projector or third-party HDBaseT receiver

Automatic display control

• Automatically changes display power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
• Enables display and volume control. CEC enables control of consumer displays.
• Eliminates the need for a complex AV control system

Automatic input selection using hot plug detect and video detection technology

• Selects active input when sources are connected or if there is a change in source power status
• Enables simplified, automatic system operation with no user intervention necessary

TCP/IP and RS-232 control of switcher

• Flexible control options for compatibility with third-party control systems
• Reduces integration time and costs

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

• Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
• Allows 4K/UHD transmission when used with a compatible HDBaseT-equipped display or HDBaseT receiver, such as the AT-OME-RX21 or AT-HDVS-SC-RX

HDCP 2.2 & 1.4 compliant

• HDCP 1.4 compliant when used with the AT-HDVS-200-RX
• HDCP 2.2 compliant when used with an HDCP 2.2 compliant receiver or switcher, such as the AT-OME-RX21 or AT-HDVS-SC-RX
• Allows protected content stream to pass between authenticated devices

Extended distance HDBaseT extension

• Transmits AV, control, and Ethernet up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation

EDID management

• Manages EDID communications between source and switcher; allows integrators to force a source to a preferred resolution
• Ensures desired audio formats and video resolutions are provided to the AV system