QSC CX108V  8-Channel Rackmount Power Amplifier - 100 Watts per Channel @ 70

QSC CX108V 8-Channel Rackmount Power Amplifier - 100 Watts per Channel @ 70

QSC AcousticCoverage Series AC-C4T 4

QSC AcousticCoverage Series AC-C4T 4" Ceiling-Mount Loudspeakers

QSC E110 10" Two-Way Passive Loudspeaker (Black)

was $774.99 Special Price $619.99
SKU
1011

The E110 is a compact, two-way loudspeaker with a 10-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSC’s DMT (Directivity Matched Transition) design with a wide 85° coverage. When used as a stage monitor, the E110 is angled up at a 55° angle allowing it to be placed near the performer when used on a crowded stage.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke. 

Features

  • High output, professional quality sound with 300 W continuous power
  • E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
  • E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:

             - For PLD/CXD visit Amplifier Navigator Software
             - For GXD visit the GXD Firmware Updater

  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Suitable for main PA and stage monitor
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket
Model E110
Configuration 1 x 10-inch, 2-way, non-powered 
Frequency Response (-6 dB) 68Hz – 20kHz
Frequency Range (-10 dB) 50Hz - 20kHz
Power capacity²: continuous/peak 300 W / 1200 W
Sensitivity 95 dB, 1 W @ 1 m
Coverage Angle 85° conical DMT
Output1 (Peak SPL @ 1m) 126 dB

Drivers

LF

HF

 

254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil;

25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver 

Nominal Impedance
Cross-over Full-range only, 1.8 kHz
Input Connections 2 x NL4, 1 x barrier strip
Enclosure Multi-angle plywood, black texture paint finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining.
Mounting and suspension 9 x M8 suspension points, dual angle, 35 mm pole-socket
Net weight 20kg / 44lbs
Shipping weight 23kg / 50lbs
Dimensions
(WxHxD) 

330 x 560 x 330 mm

13 x 22 x 13-inch

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account